IGF-1LR3
2 specifications · $105.00 – $220.00 · supplied as lyophilised powder for in-vitro laboratory research use only.
IGF-1LR3 is supplied by Aegis Bio as lyophilised powder in 2 specifications, for in-vitro laboratory research use only. Composition for the lot supplied is stated on its certificate of analysis.
Supplied against a ≥99% HPLC purity specification. Lots are analysed by Janoshik Analytical, an independent laboratory commissioned by the manufacturer, and Aegis Bio submits selected lots to Accumark in California for its own independent verification. The figure measured for the lot supplied is stated on its certificate of analysis, available by request before ordering. What each section of a COA establishes.
Specifications and pricing
| Specification | SKU | Format | Availability | Price (USD) | Add to order |
|---|---|---|---|---|---|
| 0.1 mg x 10 vials | IGF01 | Pack of 10 | In stock | $105.00 | |
| 1 mg x 10 vials | IGF1 | Pack of 10 | In stock | $220.00 |
Prices are in USD and include the vial. Flat-rate shipping is added at checkout, with a reduced rate on larger kit orders. Payment is accepted in on-chain Bitcoin or USDT (ERC-20); orders remain pending until payment is verified.
Cost per milligram
| Specification | Total material | Price | Cost per mg |
|---|---|---|---|
| 1 mg x 10 vials | 10 mg | $220.00 | $22.000/mg |
| 0.1 mg x 10 vials | 1 mg | $105.00 | $105.000/mg |
Choosing a specification
IGF-1LR3 is listed in 2 specifications. Measured by cost per milligram — the only figure that compares cleanly across different strengths and vial counts — the best value is the 1 mg x 10 vials at $220.00, which works out to $22.000/mg. The least efficient listing is the 0.1 mg x 10 vials at $105.00, or $105.000/mg — a 4.8× premium per milligram.
IGF-1LR3 is supplied in pack format only. Higher-strength packs carry a lower cost per milligram than lower-strength packs, because a fixed share of the price covers the vial, the fill and handling rather than the material itself — so buying strength is generally better value than buying count. See cost per milligram for the full comparison method.
Reconstitution reference
Resulting concentration by vial strength and diluent volume. Arithmetic only, provided for laboratory preparation and dilution planning — this is not dosing guidance. The method is set out in the reconstitution and dilution guide.
| Vial | +1 mL | +2 mL | +3 mL | +5 mL |
|---|---|---|---|---|
| 0.1 mg | 0.10 mg/mL | 0.05 mg/mL | 0.03 mg/mL | 0.02 mg/mL |
| 1 mg | 1.00 mg/mL | 0.50 mg/mL | 0.33 mg/mL | 0.20 mg/mL |
Composition and identity
IGF-1LR3 does not currently resolve to a single unambiguous PubChem record, so computed descriptors are not reproduced here rather than being estimated. Identity and content for a material of this kind are established from the certificate of analysis for the lot supplied — the component list, the ratio and the measured purity of each — rather than from a reference structure. Request the COA for the specific lot before ordering if your protocol depends on the composition. A 1 mg vial reconstituted with 2 mL yields a combined concentration of 0.5 mg/mL across all components; the ratio between components in solution is fixed by the fill and cannot be adjusted.
See how to read a certificate of analysis for what each section of the document establishes.
How this compares within its class
By best available cost per milligram it ranks 8 of 8 in Growth & Signaling, against a class range of $1.150 to $22.000 per mg. It is listed in 2 specifications, against a class median of 2.
Comparisons are drawn from the current Aegis Bio catalog and are procurement figures only — they carry no implication about relative suitability for any purpose. See the full growth & signaling class →
Catalog record
- Supplier label
- 0.1mg*10vials; 1mg*10vials
- Catalog codes
IGF01, IGF1- Price list
- 2026 edition
Specification strings are reproduced as supplied on the manufacturer price list. Where a supplier string and the normalised specification differ in formatting, the normalised value in the table above is what is fulfilled.
Storage and handling
Secretagogue sequences in this class are short and dissolve readily. Because the fill mass per vial is small relative to the vial volume, the lyophilised cake can be difficult to see — check the vial against a light before assuming it is empty, and add diluent slowly against the wall.
- Lyophilised powder: store sealed at −20 °C, protected from light and moisture.
- Bring sealed vials to room temperature before opening, so warm air does not condense moisture onto cold powder.
- Reconstitute with bacteriostatic water directed against the vial wall; do not shake or vortex. Swirl gently until dissolved.
- After reconstitution: store at 2–8 °C and use within the working period established by your laboratory.
- Avoid repeated freeze–thaw cycles. Aliquot where the solution will be accessed repeatedly.
Full detail in the storage and handling guide.
Documentation
A certificate of analysis is available by request for the batch supplied, covering HPLC purity and mass-spectrometry identity confirmation. The two measurements answer different questions — identity confirms the molecule, purity quantifies how much of the sample it represents. See what each one proves.
Frequently asked
What specifications of IGF-1LR3 are available?
IGF-1LR3 is listed in 2 specifications: 0.1 mg x 10 vials, 1 mg x 10 vials. Prices are in USD and include the vial.
Is a certificate of analysis available for IGF-1LR3?
Yes. A certificate of analysis is available by request for the batch supplied, covering HPLC purity and mass-spectrometry identity confirmation. Request the COA for a specific lot before ordering if your protocol requires documentation on file.
The vial looks empty — is it?
Secretagogue sequences are short and are filled at low masses, so the lyophilised cake is often a thin film that is difficult to see against the glass. Check the vial against a light source before assuming it is empty, and add diluent slowly down the inside wall.
How should IGF-1LR3 be stored?
Store the lyophilised powder sealed at −20 °C, protected from light and moisture. After reconstitution, store at 2–8 °C and avoid repeated freeze–thaw cycles. Bring sealed vials to room temperature before opening to avoid condensation onto cold powder.
What does shipping cost?
Carts made up entirely of single vials ship for $20.00. Any cart containing a multi-vial kit ships for $60.00 standard or $80.00 expedited, with single vials included free. From 4 kits upward the rate drops to $30.00 standard or $50.00 expedited. Shipping is added at checkout and revalidated on the server before the order is accepted.
How is payment handled?
Payment is accepted in on-chain Bitcoin or USDT on Ethereum (ERC-20). No card details are collected. Orders remain pending until the payment is verified on-chain, after which a confirmation is sent.